8 axis status and alarm monitor, 1 overview – Yaskawa MP2000 Series: User's Manual for Motion Programming User Manual

Page 299

Advertising
background image

9.8 Axis Status and Alarm Monitor

9-31

9

Engineering T

ool

MPE720

9.8 Axis Status and Alarm Monitor

This section describes the axis operation monitor and axis alarm monitor.

9.8.1 Overview

The Axis Monitor displays the operation status of the axes connected to the MP2000-series Machine Controller.
The axis status (Ready/Servo Enable [Servo ON], Alarm/Warning, Prof. Comp [Distribution Completed]/In
Position
[Positioning Completed], and Motion Command) and the user selected monitoring parameter status
are displayed onscreen.
The Alarm Monitor displays the alarm information of the axes connected to the MP2000-series Machine Controller.
The following MPE720 versions support the Axis Monitor and Alarm Monitor.

Note: The Axis Monitor and Alarm Monitor functions can be used with all MP2000-series Machine Controller

models.

MPE720

Supported Version

MPE720 Ver.5

Not supported

MPE720 Ver.6

Ver. 6.04 or later
Ver. 6.04 Lite or later

Axis Monitor

Alarm Monitor

Advertising