Caution, Vii general precautions – Yaskawa MP2000 Series: User's Manual for Motion Programming User Manual

Page 7

Advertising
background image

vii

General Precautions

• If the following coordinate commands are designated incorrectly, the subsequent move operations will

be entirely different than those expected. Before starting operations, be sure to check that the settings
are designated correctly.

The coordinate commands that must be checked are as follows:

• Absolute Programming Mode (ABS)
• Incremental Programming Mode (INC)
• Current Position Set (POS)
• Move ON Machine Coordinates (MVM)

Example of Work Coordinate System Created with

Current Position Set (POS)

Failure to carry out the above checks may result in damage to equipment, serious personal injury, or even death.

Observe the following general precautions

to ensure safe application.

• MP2000-series Machine Controller was not designed or manufactured for use in devices or systems directly

related to human life. Users who intend to use the product described in this manual for special purposes such as
devices or systems relating to transportation, medical, space aviation, atomic power control, or underwater use
must contact Yaskawa Electric Corporation beforehand.

• MP2000-series Machine Controller has been manufactured under strict quality control guidelines.

However, if this product is to be installed in any location in which a failure of MP2000-series Machine Control-
ler involves a life and death situation or in a facility where failure may cause a serious accident, safety devices
MUST be installed to minimize the likelihood of any accident.

• Drawings and photos in this manual show typical product examples that may differ somewhat from the product

delivered.

• We will update the data sheet number for the manual and issue revisions when changes are made. The edition

number of the revised manual appears on the back of the manual.

• Contact your Yaskawa representative and quote the data sheet number on the front page of the manual if you

need to replace a manual that was lost or destroyed.

• Contact your Yaskawa representative to order new nameplates whenever a nameplate becomes worn or dam-

aged.

CAUTION

EXAMPLE

(axis 1)

axis 1

axis 1

(axis 2)

axis 2

axis 2

(0, 0)

(0, 0)

Workpiece coordinate system

Machine coordinate system

Current position

Advertising