Yaskawa MP2000 Series: User's Manual for Motion Programming - Manual (Page 37)

2.2 Engineering Tool MPE720 Specifications
2-5
2
Specifications
2.2 Engineering Tool MPE720 Specifications
2.2.1 Applicable Version Numbers of the Engineering Tool MPE720
Motions programs and/or sequence programs can be created or edited on the following engineering tool MPE720
versions.
• MPE720 Ver.5 (Compatible with MP2000-series Machine Controller models excluding MP2400)
• MPE720 Ver.6 (Compatible with all models of MP2000-series Machine Controllers)
• MPE720 Ver.6 Lite (Compatible only with MP2400)
The above engineering tool software can be installed on one personal computer.
2.2.2 List of Engineering Tool MPE720 Specifications
INFO
MPE720 Ver.5
(CPMC-MPE720)
MPE720 Ver.6
(CPMC-MPE770)
MPE720 Ver.6 Lite
(CPMC-MPE770L)
Remarks
Mach
ine Co
ntro
ller Mode
l
MP2100 Compatible Not compatible −
MP2100M Compatible Not compatible −
MP2200/CPU-01 Compatible Not compatible −
MP2200/CPU-02 Compatible Not compatible −
MP2200/CPU-03 Compatible Not compatible −
MP2200/CPU-04 Compatible Not compatible −
MP2300 Compatible Not compatible −
MP2300S Compatible Not compatible −
MP2310 Compatible Not compatible −
MP2400 Not compatible Compatible −
MPU-01 Compatible Not compatible −
Progra
m
s Ladder Program Supported Not supported −
Motion Program Supported −
Sequence Program Supported −
Command Input Assistant
Function
Not provided Provided (Ver.6.04 or later) −
Program Execution
Registration Function Provided
(Ver.5.38 or later)
Provided (Ver. 6.04 or later)
Not supported by
MP2300, CPU-01,
CPU-02
Debug Function Provided −
Motion Task Manager Provided −
Drive Control Panel
Provided
(Ver.5.38 or later)
Provided (Ver.6.04 or later)
Not supported by
MP2300, CPU-01,
CPU-02
Test Run Function Not provided Provided (Ver.6.04 or later) −
Axis Operation Monitor/
Alarm Monitor Function
Not provided Provided (Ver.6.04 or later) −