Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1044)

992 Brocade Network Advisor IP User Manual
53-1003153-01
LSP
29
a. Use the Primary Path Select button to display the Path Selector dialog box ( Figure 408 ).
FIGURE 408 Path Selector dialog box
b. Select the path you want to use as the primary path from Available Paths, and use the right
arrow to move the path to Selected Paths.
c. Click OK.
Secondary paths for the LSP are listed under Paths. Use the Add and Delete buttons to add or
delete a secondary path. Use the up and down arrows to move entries up and down in the
table.
10. Select the Fast Reroute tab ( Figure 409 ).
FIGURE 409 RSVP LSP Advanced Settings Fast Reroute tab