Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 223)

Brocade Network Advisor IP User Manual 169
53-1003153-01
Software Configuration
5
Configuring IP device manager preferences
This configuration is only applicable to the Ethernet router series switch running firmware version
5.4 or later.
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Enter the number of Element Managers that can be launched from the Management
application in the LaunchLimitforElementManagerGUI field.
The minimum is 1. The maximum is 6. The default is 4.
4. Click Apply or OK to save your work.
Configuring image repository preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Select the AllowManualImports check box to turn on launching the Manual Image Import
dialog box when you select an image that is not recognized as valid image format.
4. Click Apply or OK to save your work.
Configuring MPLS management preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Select the EnableVcidThresholdNotification check box to enable notification when the VCID
pool usage crosses a threshold.
4. Enter a threshold percentage for the VCID pool usage in the VcidThresholdPercentage field.
Once this threshold is reached, a trap is generated to notify you that the VCID pool is running
out of IDs.
5. Click Apply or OK to save your work.
Configuring MPLS polling service preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Enter the frequency of MPLS polling in the PollingIntervalInSeconds field.
The minimum is 20 seconds and the maximum is 86,400 seconds (24 hours). The default is
180 seconds.