Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 913)

Brocade Network Advisor IP User Manual 861
53-1003153-01
Web Management interface
23
Web Management interface
The Element Manager allows you to access a device by connecting to its Web Management
interface.
NOTE
You must have the Element Manager Read/Write privilege to change the device configuration
through the Web Management interface.
NOTE
Web Management interface access must be enabled on the device.
Accessing the Web Management interface
To launch the Web Management interface, choose one of the following options:
• Select Configure > Element Manager > Web.
• Right-click a device on the Network Objects list or the IP or L2 Topology views and select
Element Manager > Web.
• From the Wired Product Report, IP Subnet Report, or IP Address Report, click the IP address of
the product.
If you select a Fabric OS DCB device, Web Tools displays. For information about Web Tools,
refer to the Web Tools Administrator’s Guide.
The Web Management interface displays ( Figure 343 ). You can use the Web Management
interface to manage the device configuration.
FIGURE 343 Web Management interface
If the device does not have a supported web interface, an error message displays: “Failed to
connect to the web management interface. The product might not support web interface.”