Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 300
246
Brocade Network Advisor IP User Manual
53-1003153-01
Dashboard customization
7
•
Runtime Errors— The number (error count) of runtime errors for the duration specified in
the monitor.
•
Runtime Errors/sec — The number (error rate) of runtime errors per second for the
duration specified in the monitor.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
2. Click the close (X) button.
Top Port Sync Losses monitor
The Top Port Sync Losses monitor displays the top ports with synchronization failures in a table.
The Top Port Sync Losses monitor includes the following data:
•
Widget title — The name of the widget.
•
View Details icon — Click to launch the Detailed View page.
•
Widget summary — The product count for each status (worst to best) displays underneath the
widget title.
•
Top value — The highest value in the table.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
on page 276). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays the
address of the port:
•
Sync Losses — The number of synchronization failures for the port.
•
Sync Losses/sec — The number of synchronization failures for the port per second.
Viewing additional details for the Top Port Sync Losses monitor
1. Click the View Details icon.
A more detailed widget displays which includes the following data:
•
Scope — The scope configured for the dashboard.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
on page 276). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays
the address of the port:
•
Sync Losses — The number of synchronization failures for the port.
•
Sync Losses/sec — The number of synchronization failures for the port per second.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.