Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1297)

Brocade Network Advisor IP User Manual 1245
53-1003153-01
Editing a configuration policy manager
37
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Select the day you want deployment to run from the Day of the Month list (1 through 31).
4. Click OK on the Schedule Properties dialog box.
To finish configuring the configuration policy manager, return to step 6 of “Adding a
configuration policy manager” on page 1238.
Editing a configuration policy manager
To edit an existing configuration policy manager, complete the following steps.
1. Select Monitor > Configuration Policy Manager.
The Configuration Policy Manager dialog box displays.
2. Select the policy you want to edit in the Monitors list and click Edit.
The Edit Configuration Policy Manager dialog box displays. The Edit Configuration Policy
Manager dialog box has the same fields and components as the Add Configuration Policy
Manager dialog box.
3. Change the user-defined name for the policy in the Name field.
The name must be unique. It cannot be over 64 characters, nor can the field be empty. It
cannot include asterisks.
4. Change the description of the policy in the Description field.
The description cannot be over 128 characters. It cannot include asterisks.
5. To edit the configuration policy manager checks, repeat step 5 through step 9 of “Adding a
configuration policy manager” on page 1238.
6. Click OK on the Edit Monitor dialog box.
The updated configuration policy manager displays in the Monitors list of the Configuration
Policy Manager dialog box.
7. Click Close on the Configuration Policy Manager dialog box.
Deleting a configuration policy manager
To delete an existing configuration policy manager, complete the following steps.
1. Select Monitor > Configuration Policy Manager.
The Configuration Policy Manager dialog box displays.
2. Select the policy you want to delete in the Monitors list.
3. Click Delete.
4. Click Yes on the confirmation message.
5. Click Close on the Configuration Policy Manager dialog box.