Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 296
242
Brocade Network Advisor IP User Manual
53-1003153-01
Dashboard customization
7
•
Encode Error Out/sec — The number (error rate) of encoding errors outside of frames per
second for the duration specified in the monitor.
•
Encode Error Out — The number (error count) of encoding errors outside of frames for the
duration specified in the monitor.
Viewing additional details for the Top Port Encode Error Out monitor
1. Click the View Details icon.
A more detailed widget displays which includes the following data:
•
Scope — The scope configured for the dashboard.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
on page 276). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays
the address of the port:
•
Encode Error Out/sec — The number (error rate) of encoding errors outside of frames per
second for the duration specified in the monitor.
•
Encode Error Out — The number (error count) of encoding errors outside of frames for the
duration specified in the monitor.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
2. Click the close (X) button.
Top Port Errors monitor
The Top Port Errors monitor displays the top ports with receive and transmit errors in a table.
The Top Port Errors monitor includes the following data:
•
Widget title — The name of the widget.
•
View Details icon — Click to launch the Detailed View page.
•
Widget summary — The product count for each status (worst to best) displays underneath the
widget title.
•
Top value — The highest value in the table.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
“Port summary
view”
on page 76). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays the
address of the port:
•
RX Errors/sec — The number (error rate) of receive errors per second for the duration specified
in the monitor.
•
RX Errors — The number (error count) of receive errors.
•
TX Errors/sec — The number (error rate) of transmit errors for the duration specified in the
monitor.