Configuring a one-time deployment, Schedule, Configuring an hourly deployment schedule – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 805: Configuring a daily deployment schedule, Configuring a weekly deployment schedule, Configuring a one-time deployment schedule
Brocade Network Advisor IP User Manual
753
53-1003153-01
Security configuration deployment
19
Configuring a one-time deployment schedule
To configure a one-time schedule, complete the following steps.
1. Select One Time from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Click the Date list to select a date from the calendar.
To configure security configuration schedule, refer to
Configuring an hourly deployment schedule
To configure an hourly schedule, complete the following steps.
1. Select Hourly from the Frequency list.
2. Select the minute past the hour you want deployment to run from the Minutes past the hour
list.
Where the minute value is from 00 through 59.
To configure security configuration schedule, refer to
Configuring a daily deployment schedule
To configure a daily deployment schedule, complete the following steps.
1. Select Daily from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
To configure security configuration schedule, refer to
Configuring a weekly deployment schedule
To configure a weekly schedule, complete the following steps.
1. Select Weekly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Select the day you want deployment to run from the Day of the Week list.