Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 586)

534 Brocade Network Advisor IP User Manual
53-1003153-01
Element Manager
14
If the device credentials do not match the credentials provided in discovery, the Element
Manager login dialog box displays. Continue with
step 2 .
2. Enter your user name in the Username field.
The default user name is admin.
3. Enter your password in the Password field.
The default password admin123.
4. Click Login.
The Element Manager displays.
OR
1. Select a device in the Product List.
2. Select Configure > Element Manager > Web.
The Element Manager login dialog box displays.
3. Enter your user name in the Username field.
The default user name is admin.
4. Enter your password in the Password field.
The default password admin123.
5. Click Login.
The Element Manager displays.
OR
1. Select Reports > Wired Products from the main menu.
The Wired Products report displays.
2. Click the IP address of a product in the IP Address column.
The Element Manager displays.
Launching a Telnet session
NOTE
Wireless access points in adaptive mode do not display in the Management application.
You can use Telnet to log in and issue command line-based commands to a device.
NOTE
The device must have a valid IP address. If the device does not have a valid IP address, the Telnet
selection will not be available on the Tools menu or the shortcut menu. You must right-click the
device icon, select Properties, and enter the device’s IP address before you can open a Telnet
session.
To launch the CLI, complete the following steps.
On the Product List or Topology Map (L2 or IP only), right-click a device and select CLI through
Server.