Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 239)

Brocade Network Advisor IP User Manual 185
53-1003153-01
Software Configuration
5
For Professional, the server requires 15 consecutive free ports beginning with the starting port
number.
For Trial and Licensed versions, the server requires 18 consecutive free ports beginning with
the starting port number.
6. Click Apply or OK to save your work.
NOTE
Changes to this option take effect after application restart.
7. Click OK on the “changes take effect after application restart” message.
Support mode settings
You can configure support settings to allow enhanced diagnostics.
Configuring support mode settings
To configure support mode settings, complete the following steps.
1. Select Server > Options.
The Options dialog box displays ( Figure 75 ).
2. Select Support Mode in the Category list.
NOTE
Only use this option when directed to by customer support.
The Support Mode pane displays ( Figure 74 ).
FIGURE 75 Options dialog box (Support Mode pane)
3. Select the Log client support data - Log Level list, and select the type of log data you want to
configure.
Log level options include: All, Fatal, Error, Warn, Info, Debug, Trace, and Off. Default is Info.
4. Select the Log server support data - Log Level list, and select the type of log data you want to
configure.
Log level options include: All, Fatal, Error, Warn, Info, Debug, Trace, and Off. Default is Info.
5. Click Apply or OK to save your work.