Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 432)

380 Brocade Network Advisor IP User Manual
53-1003153-01
User-defined performance monitors
8
The Performance Dashboard Monitor Targets dialog box displays.
Depending on the type of measure you select, you can add IP products/ports to the list of
targets.
If you selected a product measure, continue with step 8 .
If you selected an IP port measure, continue with step 8 .
8. Click the IP tab.
9. Select IP targets from the Available IP Sources list.
10. Click the right arrow button to move the targets to the Selected Sources list.
11. Click OK on the Performance Dashboard Monitor Targets dialog box.
The targets display in the Targets list of the Add Performance Dashboard Monitor dialog box.
12. Click OK on the Add Performance Dashboard Monitor dialog box.
The Customize Dashboard dialog box displays with the new monitor in the Performance
Monitors list.
13. Click OK on the Customize Dashboard dialog box.
The performance monitors display at the bottom of the dashboard.
Configuring a user-defined port performance monitor
For creating a user-defined dashboard, refer to “Creating a user-defined dashboard” on page 319
and perform the following steps to configure a user-defined port performance monitor.
1. Click the Customize Dashboard icon.
The Customize Dashboard dialog box displays.
2. Click the Performance tab.
3. Click Add.
The Add Performance Dashboard Monitor dialog box displays.
4. Select the type of monitor you are creating from the Monitor Type - Port area:
• Top N — Select to monitor the top N (number) ports affected by the selected measure.
• Bottom N — Select to monitor the bottom N (number) ports affected by the selected
measure.
• Distribution — Select to monitor the selected measure for five defined distribution
percentages.
• Time Series — Select to monitor a selected measure for a range of time and specified
targets.
5. Select the port measure for the monitor in the Measure area: