Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 766)

714 Brocade Network Advisor IP User Manual
53-1003153-01
Layer 3 access control list policy
19
FIGURE 280 Device_Name - Port_Number - ACL Port Configuration dialog box
4. (Ethernet routers only) Select a duration (1 Second, 1 Minute, 5 Minutes, or Cumulative) to
track the number of times an ACL filter is used in the Hits Stats Duration list.
Click Refresh to collect the hit statistics. The application updates the Hits column of the Details
of Selected ACL list.
5. To assign an ACL configuration to inbound messages, select the Inbound check box and
complete the following steps:
a. Select the Assign ACL option and choose one of the following options from the first Assign
ACL list:
• Select ACLs on this Product to assign ACLs deployed on the product to the port.
The second list is populated with the ACLs deployed on the switch or associated with a
save deployment object.
• Select ACLs bound to this port to assign ACLs bound to the interface to the port.
The second list is populated with the ACLs bound to the interface.
• Deployment_Name — Select to assign a user-configured deployment on the port.
b. Select the ACL you want to assign to the port from the second Assign ACL list.
For Ethernet router products runing IronWare 5.4 or later, you can assign ACLs to IPv4 and
IPv6 ports. To assign the ACL to an IPv4 port, select the IPv4 check box and select an ACL
from the IPv4 list. To assign the ACL to an IPv6 port, select the IPv6 check box and select
an ACL from the IPv6 list.
c. Select the Write to Product check box to create the selected ACL on the device if it does not
already exist.
6. To assign an ACL configuration to outbound messages, select the Outbound check box and
complete the following steps:
NOTE
You can only assign an ACL to an outbound message on an Application product.