Configuring an hourly configuration policy, Manager schedule, Configuring a daily configuration policy – Brocade Network Advisor IP User Manual v12.3.0 User Manual

Page 1296: Configuring a weekly configuration policy, Configuring a monthly configuration policy

Advertising
background image

1244

Brocade Network Advisor IP User Manual

53-1003153-01

Configuration policy manager scheduling

37

Configuring an hourly configuration policy manager schedule

To configure an hourly schedule, complete the following steps.

1. Select Hourly from the Frequency list.

2. Select the minute past the hour you want deployment to run from the Minutes past the hour

list.

Where the minute value is from 00 through 59.

3. Click OK on the Schedule Properties dialog box.

To finish configuring the configuration policy manager, return to

step 6

of

“Adding a

configuration policy manager”

on page 1238.

Configuring a daily configuration policy manager schedule

To configure a daily deployment schedule, complete the following steps.

1. Select Daily from the Frequency list.

2. Select the time of day you want deployment to run from the Time (hh:mm) lists.

Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.

3. Click OK on the Schedule Properties dialog box.

To finish configuring the configuration policy manager, return to

step 6

of

“Adding a

configuration policy manager”

on page 1238.

Configuring a weekly configuration policy manager schedule

To configure a weekly schedule, complete the following steps.

1. Select Weekly from the Frequency list.

2. Select the time of day you want deployment to run from the Time (hh:mm) lists.

Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.

3. Select the day you want deployment to run from the Day of the Week list.

4. Click OK on the Schedule Properties dialog box.

To finish configuring the configuration policy manager, return to

step 6

of

“Adding a

configuration policy manager”

on page 1238.

Configuring a monthly configuration policy manager schedule

To configure a monthly schedule, complete the following steps.

1. Select Monthly from the Frequency list.

2. Select the time of day you want deployment to run from the Time (hh:mm) lists.

Advertising