Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1421)

Brocade Network Advisor IP User Manual 1369
53-1003153-01
Exporting IP reports to e-mail recipients
41
Stacking Units This section only displays if the product is configured as a stacked device. It includes the
following:
•
Unit — The ID of the unit on the stack.
•
Present — Whether the stacked device is physically present.
•
Role — The role of the unit.
•
Model — The model number of the stacked device.
•
Firmware — The firmware level of the stacked device.
•
Priority — The priority bit of the stacked device.
•
Description — A description of the stacked device.
Stacking Port -
Realtime The name of the stacked device with drill-down support. When you click on the name, the
“IP Stacking Ports - Realtime report” launches (refer to
“IP Stacking Ports - Realtime
report” on page 1379).
Admin Status Admin status information includes the following:
•
Status — Whether the product is in normal operating mode or troubleshooting
mode.
•
Status Last Updated — When the last status update occurred.
•
Memo — A memo for the product.
•
Memo Last Updated — When the last memo update occurred.
Modules Module information shows what modules are installed on the product.
•
Unit/Slot Number — For products that support stacking, you can view the unit
number and slot number.
Slot Number — For products that do not support stacking, you can view the slot
number.
•
Type — For wireless products, the type shows the model name of the product. For
wired products, the type of module installed in the slot.
•
Serial Number — The serial number of the module.
For wired products, the serial number cell may be blank.
•
Ports — The number of ports on the product.
The number of ports for ATM modules displays as zero.
•
Present — Whether the module is still installed on the product.
IP Addresses The IP addresses of each interface, including the virtual routing interface on wired
products. For Layer 2 switches, the management IP address displays in the IP Addresses
table with "management" in the Interface column.
•
Port — The port number.
•
IP Address — The IP address.
•
Subnet Mask — The subnet mask number.
•
VRF — The virtual routing interface.
Ethernet Ports Physical port information for each port on the product. The identifier, interface name,
type, speed, physical address (displays as 0000.0000.0000 for module interfaces),
name, VLAN tag mode (tagged, untagged, dual, or blank), and duplex mode of the
physical interfaces on the product.
•
Identifier — The port identifier.
•
Port Name — The port name.
•
Type — The type of port.
•
Speed (Mbps) — The speed of the port.
•
MAC Address — The MAC address of the port.
•
Name — The name of the port.
•
Tag Mode — The tag mode of the port.
•
Duplex Mode — The duplex mode of the port.
•
MCT Client Name — The client name of the MCT switch.
•
Role — The role of the port, such as ICL or MCT.
TABLE 109 Detailed Product Report fields and components (Continued)