Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 694)

642 Brocade Network Advisor IP User Manual
53-1003153-01
Network OS switches in VCS mode
17
Supported VCS platforms
The following switches are supported in a virtual fabric switching environment:
• VDX 2730 10 GbE connection blade for the Fujitsu PRIMERGY BX900 and BX400 Blade
Servers
• VDX 6710
• VDX 6720-24
• VDX 6720-60
• VDX 6730-32
• VDX 6730-76
• VDX 6740
• VDX 6740T
• VDX 8770-4
• VDX 8770-8
Viewing switches in VCS mode
1. Launch the DCB Configuration dialog box using one of the following methods:
• Select Configure > DCB from the menu bar.
• Right-click the DCB switch from the device tree, and select Configure > DCB.
• Right-click the DCB switch from the topology map and select Configure > DCB.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
2. Select a Network OS switch in the DCB Products/Ports table and click View.
The View Switch dialog box displays, allowing you to view the Network OS switch parameters.
3. Click one of the following tabs and refer to the appropriate corresponding table for a
description of the feature parameters.
• QoS — Refer to “Viewing QoS parameters on the Network OS switch” on page 643.
• FCoE — Refer to “Viewing FCoE parameters on the Network OS switch” on page 643.
• VLAN Classifiers — Refer to “Viewing VLAN classifiers and rules parameters on the Network
OS switch” on page 644.
• LLDP-DCBX — Refer to “Viewing LLDP-DCBX parameters on the Network OS switch” on
page 644.
• 802.1x — “Viewing the 802.1x parameter on the Network OS switch” on page 645.