Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 458)

406 Brocade Network Advisor IP User Manual
53-1003153-01
Product List customization
9
Property fields containing a green triangle ( ) in the lower right corner are editable. To edit a field
with a green triangle ( ), click in the field and make your changes.
Adding a property label
You can create up to three user-defined product and port property labels from the Product List. To
add a new property label (column heading), complete the following steps.
1. Right-click any column heading on the Product List and select Add Column.
The Add Property dialog box displays.
2. Enter a label and description for the property.
The label must be unique and can be up to 30 characters.
The description can be up to 126 characters.
3. Select the property type from the Type list.
Options include: Product or Port.
4. Click OK.
The new property displays in the last column of the Product List as well as the associated
Properties dialog box based on the selected type.
You cannot edit the user-defined property field contents from the Product List; however, you
can edit the field in the Properties dialog box.
Property fields containing a green triangle ( ) in the lower right corner are editable. To edit a
field with a green triangle ( ), click in the field and make your changes.
Editing a property label
You can only edit labels that you create on the Product List.
To edit a user-defined property label (column heading), complete the following steps.
1. Right-click the column heading on the Product List for the property you want to edit and select
Edit Column.
The Edit Property dialog box displays.
2. Change the label and description for the property, as needed.
The label must be unique and can be up to 30 characters.
The description can be up to 126 characters.
You cannot change the property type.
3. Click OK.
The property details are updated in the Product List as well as the Properties dialog box.
You cannot edit the user-defined property field contents from the Product List; however, you
can edit the field in the Properties dialog box.
Property fields containing a green triangle ( ) in the lower right corner are editable. To edit a
field with a green triangle ( ), click in the field and make your changes.