Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1063)

Brocade Network Advisor IP User Manual 1011
53-1003153-01
VLL manager
29
Creating a new VLL instance using duplicate
To create a new VLL instance using duplicate, do the following.
1. Select Configure > MPLS > VLL.
2. Select either the Views tab or the Saved Configurations tab.
3. Select the instance you want to duplicate from the list of VLL instances.
4. Click the Duplicate button.
The Target Selection dialog box displays.
5. The text Source_Name_Copy is displayed for Name. Enter a unique name for the new instance.
Name cannot contain spaces, asterisks (*), or question marks (?).
6. Also, the Management application automatically fills in the VCID for the new instance. It
obtains the next available VCID from the VCID pool. You can change the VCID if desired as long
as it is not used in a current VLL instance.
7. Modify any of the remaining values in the instance by following the procedure presented in
“Adding or editing a VLL instance” on page 1004.
NOTE
If you are modifying the selected endpoints, the device folder under the Available Endpoints lists all
MPLS capable devices, whether or not they are covered by your MPLS license. If you select an MPLS
capable device that is not covered by your MPLS license, and if you are adding an endpoint that
would exceed the device license limit, you will not be able to configure VLL services for that device.
Editing a VLL instance
To edit a VLL instance, do the following:
1. Select Configure > MPLS > VLL.
2. Select either the Views tab or the Saved Configurations tab.
3. Select the instance you want to edit from the list of VLL instances.
4. Click the Edit button.
The Target Selection dialog box displays.
Deleting VLL instances
You can delete a VLL configuration from a device, whether or not it is on a device covered by your
MPLS license. Do the following.
1. Select the VLL instance you want to delete from the VLL Configuration list. You can select more
than one by pressing CTRL + click to select the instances.
2. Click Delete.
3. Click Next to go to the next step.
4. Click Deploy to launch the Deployment Properties dialog box.