Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 673)

Brocade Network Advisor IP User Manual 621
53-1003153-01
QoS configuration
17
1. Select Configure > DCB.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
2. Select a switch, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
The QoS dialog box displays.
4. Select one or more DCB maps.
5. Click the left arrow button.
The selected DCB map row is removed from the list.
6. When you have finished the configuration, click OK to launch the Deploy to Products dialog
box.
NOTE
With Fabric OS version 7.0 and later, there is only one DCB map (default), that you cannot
delete.
7. Click OK after changing the attributes of the current deployment.
The Deployment Status dialog box displays.
8. Click Start on the Deployment Status dialog box to save the changes to the selected devices.
9. Click Close to close the Deployment Status dialog box.