Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 1153
Brocade Network Advisor IP User Manual
1101
53-1003153-01
SAN performance overview
34
•
BB Credit Zero — Available for FC ports.
•
Truncated Frames — Available for FC ports.
•
FEC Corrected Blocks — Available for FC ports.
•
FEC Uncorrected Blocks — Available for FC ports.
•
Dropped Packets — Available for FCIP tunnels only.
•
Cumulative Compression Ratio — Available for FCIP tunnels only.
•
Current Compression Ratio — Available for FCIP tunnels only.
•
Latency — Available for FCIP tunnels only.
•
Link Retransmits — Available for FCIP tunnels only.
•
Timeout Retransmits — Available for FCIP tunnels only.
•
Fast Retransmits — Available for FCIP tunnels only.
•
Duplicate Ack Received — Available for FCIP tunnels only.
•
Window Size RTT — Available for FCIP tunnels only.
•
TCP Out of Order Segments — Available for FCIP tunnels only.
•
Slow Start Status — Available for FCIP tunnels only.
•
Uncompressed Tx/Rx MB/sec - Available for FCIP tunnels only.
•
Overflow Errors — Available for 10GE ports only.
•
Runtime Errors — Available for 10GE ports only.
•
Receive EOF — Available for 10GE ports only.
•
Too Long Errors — Available for 10GE ports only.
•
Underflow Errors — Available for 10GE ports only.
•
Alignment Errors — Available for 10GE ports only.
•
NOS Count — Available for managed HBA ports and managed CNA ports.
•
Error Frames — Available for managed HBA ports and managed CNA ports.
•
Under Sized Frames — Available for managed HBA ports and managed CNA ports.
•
Over Sized Frames — Available for managed HBA ports and managed CNA ports.
•
Primitive Sequence Protocol Errors — Available for managed HBA ports and managed CNA
ports.
•
Dropped Frames — Available for managed HBA ports and managed CNA ports.
•
Bad EOF Frames — Available for managed HBA ports and managed CNA ports.
•
Invalid Ordered Sets — Available for managed HBA ports, managed CNA ports, and FC ports.
•
Non Frame Coding Error — Available for managed HBA ports and managed CNA ports.
NOTE
Under Sized Frames, Over Sized Frames, Bad EOF Frames, Dropped Frames, and Non Frame Coding
Error measures are not supported for managed HBA and CNA ports on Emulex Adapters.