Brocade Network Advisor IP User Manual v12.3.0 User Manual

Page 1422

Advertising
background image

1370

Brocade Network Advisor IP User Manual

53-1003153-01

Exporting IP reports to e-mail recipients

41

Cluster (MCT switches
only)

Cluster information for a Multi-Chassis Trunk (MCT) switch. Information includes:

Cluster ID — The MCT cluster ID.

Cluster Name — The MCT cluster name.

Cluster State — Whether the MCT cluster is deployed or undeployed.

Client Isolation Mode — Whether isolation mode is loose or strict.

Active Member VLAN Range — The active member VLAN for data.

Configured Member VLAN Range — The configured member VLAN for data.

Keep Alive VLAN — An alternate VLAN for Cluster Communication Protocol (CCP)
when the Inter-Chassis Link (ICL) is down.

Session VLAN — The VLAN used by the cluster for control operations.

ICL Name — The ICL name.

Cluster Peer (MCT
switches only)

Cluster peer information for a Multi-Chassis Trunk (MCT) switch. Information includes:

Peer Product — The name and IP address of the MCT peer product.

Peer IP Address — The VE interface IP address of the MCT peer.

Peer RBridge ID — The RBridge ID of the MCT peer.

ICL Name — The name of the ICL used to reach the MCT peer.

Keep Alive Interval — The interval time for CCP over the keep-alive VLAN.

Hold Time — The hold-time before making the CCP down state when ICL goes down.

Fast Failover — Whether fast failover is enabled or disabled.

Active VLAN Range — The active member VLAN for data.

Peer State — Whether the peer state is CCP up or CCP down.

Peer State Up Time — How long the peer has been up.

Peer State Down Reason — The reason the peer is down.

Physical Ports -
Realtime

The name of the device with drill-down support. When you click on the name, the “IP
Physical Ports - Realtime report” launches (refer to

“IP Physical Ports - Realtime report”

on page 1378).

GRE Tunnels

Information on any GRE tunnel on the product. Information includes the following:

Identifier — The GRE tunnel identifier.

Name — The name of the GRE tunnel.

Controller Cluster

Cluster information for a wireless controller. Information includes:

Cluster Name — The cluster name.

Cluster Mode — The cluster mode. Options include Active and Standby.

Cluster members — The IP address of the controllers in cluster mode.

Virtual Interfaces

Information on any virtual interface on the product.

Loopback Interfaces

Information on any loopback interface on the product.

Chassis Inventory

Information for fans, power supplies, sensors, and other chassis components on
third-party products. Information is displayed for a third-party product if the product
supports the ENTITY MIB.

Type — The chassis model.

Name — The name of the chassis.

Description — A description of the product.

Serial Number — The serial number of the product.

TABLE 109

Detailed Product Report fields and components (Continued)

Advertising