Ip status widget – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 389
Brocade Network Advisor IP User Manual
337
53-1003153-01
Status widgets
8
IP Status widget
The IP Status widget (
) displays the device status as a pie chart.
FIGURE 148
IP Status widget
The IP Status widget includes the following data:
•
Severity icon/product count/widget title — The color of the worst status followed by the product
count with that status displays before the widget title.
•
Pie chart — The device status as a percentage of the total number of devices.
The pie chart displays the percentage in various colors on each slice. Tooltips showing the
number of devices in that state are shown when you pause on the bar. When there is one
status category with less than one percent of the total number of devices, the status widget
displays the number of devices in each category on each slice.
For a VCS fabric, status is determined by the reachability of the individual members of the VCS
fabric. The IP Status widget displays the most severe reachability of a member of the VCS
fabric. For example, if one member of the VCS fabric has a reachability status of “degraded”
and all other members are “reachable”, then the VCS fabric status displays as “degraded”.
•
Color legend — Displays the color legend below the pie chart using the following color code:
-
Green — Reachable: IP product is online and accessible by IP (ICMP/TCP) and SNMP.
-
Yellow — Degraded Link: IP product is accessible by IP (ICMP/TCP); however, it is not
accessible by SNMP.
-
Violet — Unhealthy: One or more units are not present, unit power is off, or the stacking
connection is down.
-
Blue — Not Reachable: IP product is not online and not accessible by IP (ICMP/TCP).
•
Time Scope — The time scope.
Accessing additional data from the IP Status widget
Double-click a section in the IP Status widget to navigate to the IP Products - Status dialog box
(where Status is the status of the section you selected). For more information, refer to