Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 185)

Brocade Network Advisor IP User Manual 131
53-1003153-01
Port Groups
4
4. Click OK to close the dialog box.
Port Actions list Select one of the following options:
•
Enable
•
Disable
•
Display Attached Port Properties
Performance list Select to launch the real time or historical performance.
Identifier The identifier of the port.
Name The name of the port.
MAC Address The MAC Address of the port.
Port Status The status of the port.
Port State The state of the port.
Type The port type.
Speed The Speed of the port.
L2/Tag Mode Indicates whether L2 tag mode is enabled or disabled. If enabled,
indicates whether the port is tagged, untagged, or dual.
Untagged VLAN ID The untagged VLAN identifier of the port.
Duplex Mode The duplex mode of the port, such as auto-sense, full-duplex, or none.
Stacking Port Whether or not the port stacked.
Role The role of the device, such as Edge.
Product The name of the product.
User_defined_property (up to 3) A user-defined port property value. You can create up to 3 user-defined
properties (refer to
“Properties customization” on page 1473).
TABLE 16 Port Group Properties fields and components
Field/Component Description