Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1392)

1340 Brocade Network Advisor IP User Manual
53-1003153-01
Event logs
38
E-mailing all event details from the Master Log
NOTE
You must configure e-mail notification before you can e-mail event details from the Master Log. To
configure e-mail notification, refer to
“Configuring e-mail notification” on page 1274.
To e-mail all event details from the Master Log, complete the following steps.
1. Right-click an entry in the Master Log.
2. Select E-mail > All.
The E-mail dialog box displays.
3. Enter the e-mail address of the person to receive the e-mail notifications in the To field.
4. Enter your e-mail address in the From field.
5. Click OK.
E-mailing selected event details from the Master Log
NOTE
You must configure e-mail notification before you can e-mail event details from the Master Log. To
configure e-mail notification, refer to
“Configuring e-mail notification” on page 1274.
To e-mail selected event details from the Master Log, complete the following steps.
1. Right-click the selected events in the Master Log.
2. Select the events that you want to e-mail.
3. Select E-mail > Selection.
The E-mail dialog box displays.
4. Enter the e-mail address of the person to receive the e-mail notification in the To field.
5. Enter your e-mail address in the Reply From field.
6. Click OK.
Displaying event properties from the Master Log
You can view detailed information for an event.
NOTE
Network OS events display in both the SAN and IP tab of the Master Log.
To display event details from the Master Log, complete the following steps.
1. Right-click an entry in the Master Log.
2. Select Properties.
The Event Properties dialog box, shown in Table 106 , displays.
3. Review the information.