Editing the list of ip addresses and weights, Deleting a zone configuration – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 1118
1066
Brocade Network Advisor IP User Manual
53-1003153-01
GSLB zone configuration
31
The IP Weights list is used if IP Weights is specified in the selected policy (during site
configuration using the Site Configuration dialog box). You assign a weight to an IP address so
that the ServerIron ADX product distributes GSLB traffic among IP addresses in a DNS reply.
8. Enter the IP address to which you want to assign a weight in the IP Address column.
9. Enter a value from 0 through 100 in the Weight column. The default is 0.
NOTE
To delete an IP address and weight, select the entry, then click Delete to remove it from the IP
Weights list.
10. Continue adding hosts to the Add Hosts dialog box. When you have finished, click OK to add
the zone to the Hosts list of the Zone Configuration dialog box.
Deleting a zone configuration
To delete a zone configuration, complete the following steps.
1. Select the zone you want to delete from the Hosts list of the Zone Configuration dialog box.
2. Click Delete.
3. When the confirmation dialog box appears, click Yes.
Editing the list of IP addresses and weights
The List of IP Addresses and Weights dialog box allows you to import a list of IP addresses and
weights by overwriting existing entries or appending to existing entries.
1. Select Configure > Application Delivery > GSLB.
2. Click the Zone Configuration tab.
3. Click Add.
The Zone Configuration dialog box displays.
4. Click Add.
The Add Hosts dialog box displays.
5. Click Add in the IP Weights list.
The List of IP Addresses and Weights dialog box displays.
6. Enter a list of IP addresses into the List of IP Addresses and Weights text box. If a zone has IP
weights, you can change the IP weights for a single host in a zone. Each entry must be on a
separate line, separated by a comma.
7. Click the Overwrite option to select the option to overwrite existing IP addresses and weights.
8. Click the Append option to add new IP addresses and weights to the current list.
•