Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1307)

Brocade Network Advisor IP User Manual 1255
53-1003153-01
Configuration rules
37
Adding a configuration condition
1. Select Monitor > Configuration Policy Manager.
The Configuration Policy Manager dialog box displays.
2. Click Add.
The Add Monitor dialog box displays.
3. Click the Switch/Router Checks tab.
4. Select Add > Configuration Rule.
The Add Configuration Rule dialog box displays.
5. Select Add > Condition.
The Add Condition dialog box displays ( Figure 531 ).
FIGURE 531 Add Condition dialog box
6. Enter a user-defined name for the rule in the Name field.
The name must be unique. The name cannot be over 128 characters. The only special
character allowed is an underscore (_).
7. Enter a description of the rule in the Description field.
The description cannot be over 1024 ASCII characters.
8. Select the backup configuration file you want to use by completing the following steps.
a. Click the Product ellipsis button complete the steps in “Selecting a product” on
page 1256.
If the product has no configuration files, the Configuration list is empty. You can manually
trigger configuration file back up for the products to populate this list.
If the product has multiple configuration files, the latest configuration file is selected and
displays in the Configuration list by default.
b. Select the backup configuration file you want to use from the Configuration list.