Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 214)

160 Brocade Network Advisor IP User Manual
53-1003153-01
SNMP Trap forwarding credential settings
5
Configuring the SNMP trap listing port number
1. Select Server > Options.
The Options dialog box displays.
2. Select Trap Registration in the Category pane.
3. Enter the SNMP listening port number of the Server in the SNMP Listening Port (Server) field, if
necessary.
The default SNMP listening port number is 162 and is automatically populated.
4. Click Apply or OK to save your work.
SNMP Trap forwarding credential settings
You can configure SNMP credentials for the traps forwarded by the server.
Configuring SNMP v1 and v2c credentials
To configure a SNMP v1 or v2c credentials, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Trap Forwarding Credentials in the Category pane.
The Trap Forwarding Credentials pane displays ( Figure 65 ).
FIGURE 65 Options dialog box (Trap Forwarding Credentials pane)
3. Enter the unique community string (case sensitive, 1 to 16 characters). in the Community and
Confirm Community fields.
Displays as asterisks. Allows all printable ASCII characters.
4. Click Apply or OK to save your work.