Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 470)

418 Brocade Network Advisor IP User Manual
53-1003153-01
IP Topology view
9
IP Topology view
The IP Topology view displays a map of the devices on your network. To display the topology map for
IP, you must have the IP - Main Display - IP privilege. For more information about privileges, refer to
“User Privileges” on page 1423.
For more information about the components and customization of the topology map, refer to the
following sections:
• “IP topology map components” on page 424.
• “Topology map elements” on page 424.
• “Topology map layout” on page 426.
For more information about functions you can perform on the topology map, refer to “Topology Map
functions” on page 394.
L2 Topology view
The L2 Topology view displays a map of the Layer 2 traffic for devices on your network. The links on
the map show physical links between physical ports of devices. If devices have more than one
physical link between them, all physical links display on the topology map. To display the topology
map for Layer 2, you must have the IP - Main Display - L2 privilege. For more information about
privileges, refer to
“User Privileges” on page 1423.
The L2 Topology view Product List has two categories, System Groups and User-defined Groups.
System Groups has only All IP Products as a category, which contains all IP products in the system.
User-defined Groups contain all user-defined product groups with Topology Display enabled. Each
user-defined product group shows the products contained within that product group.
For more information about the components and customization of the topology map, refer to the
following sections:
• “IP topology map components” on page 424.
• “Topology map elements” on page 424.
• “Topology map layout” on page 426.
For more information about functions you can perform on the topology map, refer to “Topology Map
functions” on page 394.