Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1427)

Brocade Network Advisor IP User Manual 1375
53-1003153-01
Exporting IP reports to e-mail recipients
41
Module List report
The Module List report presents the modules installed in discovered IronWare or third-party
products and in which products they are installed.
The Module List report has the parameters described in Table 112 .
You can sort the report by clicking on a column header. For example, if you want to sort the table by
serial number, click the Serial Number column header.
Profile Name The AP profile name.
RF Domain Name The RF domain name set for the AP.
Serial Number The serial number of the AP.
Firmware The firmware level of the AP.
Client Count The number of wireless clients or stations connected or associated to the AP.
Last Scanned The last time the APs were scanned.
TABLE 112 Module List report fields and components
Field/Component Description
Description The type of module installed.
Serial Number The serial number of the module.
Product The host name of the product where the module is installed. This name can be set
from the CLI. Click the name of the product to display the Detailed Product Report.
VCS Name The name of the VCS fabric.
[Unit/]Slot Number The slot on the product where the module is installed. If the product supports
stacking, the slot is shown in the [unit#/]slot# format.
TABLE 111 AP Products report fields and components (Continued)