Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 202)

148 Brocade Network Advisor IP User Manual
53-1003153-01
Flyover settings
5
FIGURE 59 Options dialog box (Flyovers pane, Connection tab)
a. Select the protocol type from the Type list, if necessary.
Depending on which protocol you select, some properties may not be available for all
protocols.
b. Select each property you want to display in the connection flyover from the Available
Properties table.
Depending on which protocol you select, some of the following properties may not be
available for all protocols:
IP
• IP_Address:Port-IP_Address:Port
c. Click the right arrow to move the selected properties to the Selected Properties table.
d. Use the Move Up and Move Down buttons to reorder the properties in the Selected
Properties table.
The properties displayed in the Selected Properties table appear in the flyover display.
8. Remove connection properties you do not want to display on flyover by selecting the property in
the Selected Properties table and clicking the left arrow.
9. Click Apply or OK to save your work.
Turning flyovers on or off
Flyovers display when you place the cursor on a product. They provide a quick way to view a
product’s properties.
To turn flyovers on or off, select Enable Flyover Display from the View menu.
Viewing flyovers
On the Topology Map, rest the pointer over a product icon, port, or connection.
The pop-up window containing the product, port, or connection information displays.
For the product icon, the pop-up window displays the display name and IP address of the device.
For the connection, the pop-up window displays the IP address and port number for each device at
either end of the connection. If one of the connections is a cloud, the port number does not display.