Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 712)

660 Brocade Network Advisor IP User Manual
53-1003153-01
FCoE login groups
17
The FCoE login management feature is disabled and all login groups on the selected switch are
deleted.
The value in the FCoE Login Management State column for the selected switch is Disabled and
no login groups appear under the switch after the FCoE Configuration dialog box refresh
operation.
• “FCoE login groups”
Enabling the FCoE login management feature on a switch
1. Select Configure > FCoE from the menu bar.
or
Right-click the DCB device and select FCoE.
The FCoE Configuration dialog box displays.
2. Select an FCoE-disabled switch from the Login Groups list and click Enable.
3. The FCoE Login Group Configuration and Status dialog box displays.
4. Review the changes carefully before you accept them.
5. Click Start to apply the changes, or click Close to abort the operation.
The FCoE login management feature is enabled on the selected switch.
The value in the FCoE Login Management State column is Enabled after the FCoE
Configuration dialog box refresh operation.