Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 265)

Brocade Network Advisor IP User Manual 211
53-1003153-01
User profiles
6
• Account State — Displays the current state of the account. Valid states include:

Active

Locked out by user manager

Locked out threshold reached

Password expired

Password format policy violated

Password history policy violated
• E-mail Notification Enable check box — Select to enable e-mail notification.
• Filter — Click to configure e-mail notification (refer to “Configuring e-mail notification” on
page 213).
• E-mail Address — Displays your e-mail, text message, or page addresses if entered while
adding a user; otherwise, this field is blank.
• Password Age — Displays the age of the password in days. Default is zero.
• Password Policy View button — Click to display the current password policy (refer to
“Viewing your password policy” on page 212).
• CLI Credential Configure button — Click to display the CLI Credentials dialog box (refer to
“Configuring CLI credentials” on page 214).
• Optional Messages Reset button — Click to reset all optional messages to the default
behavior. For more information, refer to
“Resetting optional messages” on page 213.
2. Click OK on the User Profile dialog box.
Editing your user profile
To edit your user profile, complete the following steps.
1. Select Server > User Profile.
The User Profile dialog box displays.
2. Change your name in the Full Name field.
3. Change your password in the Password and Confirm Password fields.
Passwords display as dots (.).
4. Change your user profile description in the Description field.
5. Change your phone number in the Phone Number field.
6. Select the E-mail Notification Enable check box to enable e-mail notification.
Clear the E-mail Notification Enable check box to disable e-mail notification.
7. Click Filter to set up basic event filters.
For step-by-step instructions about setting up basic event filters, refer to “Setting up basic
event filtering” on page 1276.
8. Change your e-mail, text message, or page address in the E-mail Address field.
Enter more than one e-mail address, separating each with a semi-colon. To send a text
message or page via e-mail, use the following format number@carrier.com, where number is
your phone number and carrier.com is the SMS server. For example, [email protected]
(text message) or [email protected] (page).