Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 976)

924 Brocade Network Advisor IP User Manual
53-1003153-01
Monitoring configurations
26
4. Click the Targets tab and complete the following steps.
FIGURE 371 CLI Template dialog box - Target tab
a. Select the devices to which you want the configuration deployed from the Available Targets
table.
You can deploy the configuration to individual devices, devices in a device group, or
devices in an IP subnet.
For VCS fabrics, you can deploy the configuration to one or more individual members in a
fabric (select each member) or to all members of a fabric (select the VCS fabric).
The Available Targets table displays an inventory of the available product targets and
includes the same detail as the Product List (refer to
“IP Product List” on page 392).
b. Click the right arrow button to move your selection to the Selected Targets table.
To search for devices, right-click anywhere in the table and select Search. For more
information about searching for devices, refer to
“Searching for a device” on page 408.
The Selected Targets table displays the selected products and includes the same detail as
the Product List (refer to
“IP Product List” on page 392).
c. Select the Prompt for additional targets during manual deployment check box to be able to
select additional targets during manual deployment.