Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 835)

Brocade Network Advisor IP User Manual 783
53-1003153-01
Zoning administration
20
This identifies the target entity for all subsequent zoning actions and displays the zoning
databases for the selected entity.
3. Select the Fabric Zone DB from the Zone DB list.
4. Select Clear All from the Zone DB Operation list.
5. Click Yes on the confirmation message.
The message closes and the Fabric Zone DB is cleared of all zoning configurations.
6. Click OK to close the Zoning dialog box.
Removing all user names from a zone database
Use this procedure to remove all user names from the selected offline zone database.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Select a fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
databases for the selected entity.
3. Select a zone database that you have checked out (your user name is in the Current User
column) in the Zone DB list.
4. Select Undo CheckOut from the Zone DB Operation list.
5. Click Yes in the confirmation message.
This removes the user names of users currently logged in to the client from the Current User
column for this zone database.
6. Click OK to save your work and close the Zoning dialog box.
Any zones or zone configurations you have changed are saved in the zone database.
Finding a member in one or more zones
Use this procedure to locate all instances of a member in the Zones list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. If you want to show all fabrics discovered in the Potential Members list, right-click in the
Potential Members list and select Display All.
5. Select the devices or ports you want to find in the Potential Members list.
6. Click Find > between the Potential Members list and the Zones list.