Adding measures to products – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 1168
1116
Brocade Network Advisor IP User Manual
53-1003153-01
IP real-time performance monitoring
34
4. Click OK.
The Real Time Graphs/Tables dialog box displays.
Removing products and ports from real-time performance
To remove products and ports from real-time performance monitoring, complete the following
steps.
1. Click Sources from the Real Time Graphs/Tables dialog box.
2. Select the products you want to remove in the Selected Products list and click the left arrow
button to move them to the Available Products list.
3. Select the ports you want to remove in the Selected Ports list and click the left arrow button to
move them to the Available Ports table.
4. Click OK.
5. The Real Time Graphs/Tables dialog box displays.
Adding measures to products
To add measures to products, complete the following steps.
1. Right-click a device and select Performance > Real Time Graph/Table.
The Real Time Graphs/Tables dialog box displays.
2. Select Products from the Show list.
The available products display in a list.
3. Select a product in the list and click Measures.
The Select measures - Real Time Graphs/Tables dialog box displays.
4. Select Device Measures from the Show list.
5. To add a MIB measure to the product, complete the following steps.
a. Click MIBS tab in the Available Measures area.
b. Select the MIB measure you want to add to the product.
Select multiple measures by holding down the CTRL key and clicking more than one
measure.
You can also search (refer to
on page 407) for a MIB in the list.
c. Click the right arrow button to move them to the Selected Measures list.
6. To add an expression to the product, complete the following steps.
a. Click the Expressions tab in the Available Measures area.
b. Select the expression you want to add to the product.
Select multiple expressions by holding down the CTRL key and clicking more than one
expression.
To add an expression to the list, refer to