Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 988)

936 Brocade Network Advisor IP User Manual
53-1003153-01
Products supporting the image import
27
Products supporting the image import
Table 90 lists the products that support the boot images, software images, and unified images.
Boot image management
Management of boot and monitor images from IronWare products can be done using the Firmware
Management module. The Firmware Management module manually imports boot images into the
Management application. This module also allows you to delete boot images from the
Management application. The module also deploys boot and monitor images that are available in
the Management application to IronWare products. The Configuration Management privilege and
Firmware Management privilege are required to deploy boot and monitor images using the
Firmware Management dialog box.
Viewing the list of boot images
You can view a list of boot and monitor images that are known to the Management application from
the Boot Images tab of the Firmware Management dialog box if you have the Firmware
Management privilege in your Management application user account or role.
The Boot Images tab lists the boot or monitor images in the Management application and contains
the following buttons:
• Import — Opens the Import Boot Image dialog box that allows you to browse and select the
boot or monitor image file you want to import into the Management application. Newly
imported images are saved to the Management application. They are displayed on the Boot
Images tab.
TABLE 90 Products supporting the image import
Image type Products supported
Boot images
•
Ethernet chassis (BigIron RX)
•
Ethernet routers (NetIron XMR, MLX, CES, CER)
•
Terathon (BigIron MG8, NetIron 40G, NetIron IMR 640)
•
Ethernet switches (FastIron switches) and Data Center switch (TurboIron 24X)
•
ServerIron, ServerIron ADX
•
IP Encryption switch (SecureIron)
•
IronPoint FES
Software images
•
Ethernet chassis (BigIron RX)
•
Ethernet routers (NetIron XMR, MLX, CES, CER)
•
Terathon (BigIron MG8, NetIron 40G, NetIron IMR 640)
•
ServerIron, ServerIron ADX
•
IP Encryption switch (SecureIron)
•
Ethernet switches (FastIron switches) and Data Center switch (TurboIron 24X)
•
EdgeIron 4802CF, 48G, 48GS, and 8x 10G
•
IronPoint FES
Unified images
•
Ethernet chassis (BigIron RX) (release 02.2.01)
•
Ethernet routers (NetIron XMR, MLX, CES, CER) (Ethernet Edge router (CER) release
03.5.00-application images only)
•
Terathon (BigIron MG8, NetIron 40G, NetIron IMR 640), (release 02.3.00)
•
VDX switches (release 2.1.0 and later)
•
NetIron Simplified XMR/MLX and CES/CER (release 5.3.0 and later)