Configuring a monthly deployment schedule, Configuring a yearly deployment schedule – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 1263
Brocade Network Advisor IP User Manual
1211
53-1003153-01
Schedule PoE power deployment
36
Configuring a monthly deployment schedule
To configure a monthly schedule, complete the following steps.
1. Select Monthly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Select the day you want deployment to run from the Day of the Month list (1 through 31).
To finish configuring the deployment schedule, return to one of the following procedures:
•
To configure an enable PoE schedule, refer to
•
To configure an disable PoE schedule, refer to
of
•
To update a PoE schedule, refer to
“Updating a power deployment schedule”
Configuring a yearly deployment schedule
To configure a yearly schedule, complete the following steps.
1. Select Yearly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Click the Date list to select a date from the calendar.
To finish configuring the deployment schedule, return to one of the following procedures:
•
To configure an enable PoE schedule, refer to
•
To configure an disable PoE schedule, refer to
of
•
To update a PoE schedule, refer to