Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 556)

504 Brocade Network Advisor IP User Manual
53-1003153-01
LDAP server configuration
13
9. Create the NmAors attribute by completing the following steps.
a. Enter NmAors in the Common Name field.
b. Enter NmAors in the LDAP Display Name field.
c. Enter a unique object identifier in the Unique x500 Object ID field.
d. Enter a description of the attribute in the Description field.
e. Select Case Insensitive String in the Syntax list.
f. Click OK.
10. Right-click the Attributes folder (Console Root/Active Directory Schema/Attributes) and select
New > Attribute.
11. Create the NmRoles attribute by completing the following steps.
a. Enter NmRoles in the Common Name field.
b. Enter NmRoles in the LDAP Display Name field.
c. Enter a unique object identifier in the Unique x500 Object ID field.
d. Enter a description of the attribute in the Description field.
e. Select Case Insensitive String in the Syntax list.
f. Click OK.
12. Expand the Classes folder (Console Root/Active Directory Schema) and right-click user and
select Properties.
The user Properties dialog box displays.
13. Click the Attributes tab.
14. Click the Add button.
The Select Schema Object dialog box displays.
15. Select NmAors and click OK.
16. Click the Add button on the user Properties dialog box.
17. Select NmRoles and click OK.
18. Click OK on the user Properties dialog box.
19. Close the Management console.
20. Restart the AD server.
After you restart the AD server, go to “Configuring authorization details on the external LDAP
server” on page 505.
Configuring the Active Directory Schema on the LDAP server
1. Select Start > Run.
2. Type regsvr32 schmmgmt.dll and press Enter.
Make sure that the following message displays: Dll register Server in schmmgmt.dll
succeeded.
3. Select Start > Run.