Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 1185
Brocade Network Advisor IP User Manual
1133
53-1003153-01
IP historical performance monitoring
34
FIGURE 475
Data Collector wizard MIB Index dialog box
You can define index values for each MIB object that requires an index.
17. From the MIB Instances list, select the required MIB variable.
The Complete SNMP OID, the Index Name, and the Index Value display beneath the MIB
Instances list.
18. You have several options for entering index information:
•
Select the Dynamic walk check box to dynamically select index values for a particular
index. When enabled, instances are selected based on a MIB walk.
•
Click the Populate All button to populate the index with all objects. You can then use the
Delete Index button to delete any objects you do not need.
If you selected a product collector, the index is populated with indexes of all instances of
the selected MIB variable.
If you selected a port collector, the index is populated with the ifIndex value of the port with
which the MIB variable is associated.
•
Click the MIB Walk button to start a MIB walk facility. Refer to
•
Click the Add Index button to add an index.
•
Click the Delete Index button to delete an index.