Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 297
Brocade Network Advisor IP User Manual
243
53-1003153-01
Dashboard customization
7
•
TX Errors — The number (error count) of transmit errors.
Viewing additional details for the Top Port Errors monitor
1. Click the View Details icon.
A more detailed widget displays which includes the following data:
•
Scope — The scope configured for the dashboard.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
“Port
summary view”
on page 76). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays
the address of the port:
•
RX Errors/sec — The number (error rate) of receive errors per second for the duration
specified in the monitor.
•
RX Errors — The number (error count) of receive errors.
•
TX Errors/sec — The number (error rate) of transmit errors for the duration specified in the
monitor.
•
TX Errors — The number (error count) of transmit errors.
•
Product — The product affected by this monitor per second.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
2. Click the close (X) button.
on page 281Top Port Overflow Errors monitor
The Top Port Overflow Errors performance monitor displays the top ports with overflow errors in a
table.
The Top Port Overflow Errors performance monitor includes the following data:
•
Widget title — The name of the widget.
•
View Details icon — Click to launch the Detailed View page.
•
Widget summary — The product count for each status (worst to best) displays underneath the
widget title.
•
Top value — The highest value in the table.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
on page 276). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays the
address of the port:
•
Overflow Errors— The number (error count) of overflow errors for the duration specified in the
monitor.
•
Overflow Errors/sec — The number (error rate) of overflow errors per second for the duration
specified in the monitor.