Viewing vcs fabric properties, Viewing vcs fabric, Properties – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 1514
1462
Brocade Network Advisor IP User Manual
53-1003153-01
IP device properties
E
4. Click OK to close the dialog box.
Viewing VCS fabric properties
To view properties for a VCS fabric, complete the following steps.
1. Select Ethernet Fabrics from the view list on the Product List toolbar.
2. Right-click the VCS fabric in the Product List and select Properties.
The Fabric_Name Properties dialog box displays.
3. Review the device and port properties.
vNetwork Connectivity tab
Select to display information about vNetwork connectivity for the fabric
members. For detailed information about this tab, refer to
“VM
Connectivity tab”
on page 2752.
Flex Port
Displays the ports which support Ethernet or Fibre Channel.
TABLE 143
VCS fabric properties
Field/Component
Description
Properties tab
Select to display information about the fabric.
Detailed Report button
Click to launch the detailed cluster report.
Name
The name of the fabric.
Alias
The alias name. This is an editable field.
Host Name
The host name associated with the fabric.
System Name
The name of the product.
IP Address
The IP address (IPv4 or IPv6 format) of the product.
Product Type
The fabric’s product type, which is a Layer 2 switch.
VCS Mode
The VCS mode of the switch, which can be enabled or disabled.
VCS ID
The VCS ID configured in the fabric.
Config Mode
The configuration mode of the fabric.
Node Count
The number of fabric nodes in the fabric.
Principal Switch
The name and IP address of the principal switch.
Status
The health status of the cluster.
Admin Status
The administrative status of the switch, for example, Normal.
Memo
Additional comments regarding the switch.
Vendor
The switch vendor.
Model
The switch model type (VDX 6710, VDX 6720, or VDX 6730).
Port Count
The number of ports on the switch.
Firmware
The firmware version and build number.
Location
The physical location of the product. This is an editable field.
TABLE 142
IP device and port properties (Continued)
Field/Component
Description