Top port errors monitor – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 405
Brocade Network Advisor IP User Manual
353
53-1003153-01
Performance monitors
8
•
Encode Error Out/sec — The number (error rate) of encoding errors outside of frames per
second for the duration specified in the monitor.
•
Encode Error Out — The number (error count) of encoding errors outside of frames for the
duration specified in the monitor.
•
CRC Errors — The number of CRC errors.
•
Link Failures — The number of link failures.
•
Invalid Transmissions — The number of invalid transmissions.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
•
Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
“Editing a preconfigured performance monitor”
Accessing additional data from the Top Port Encode Out Errors monitor
•
Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
•
Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to
Top Port Errors monitor
The Top Port Errors monitor (
) displays the top ports with receive and transmit errors in a
table.
FIGURE 158
Top Port Errors monitor