Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 232)

178 Brocade Network Advisor IP User Manual
53-1003153-01
Software Configuration
5
Configuring the preferred IP format
To configure the preferred IP format for the Management application server to connect with
Fabric OS and Network OS devices, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Product Communication from the Software Configurations list in the Category pane.
The Product Communication pane displays ( Figure 69 ).
3. (Fabric OS and Network OS products only) Select IPv4 (default) or IPv6 to set the preferred IP
format.
4. Click Apply or OK to save your work.
Configuring IP communication
To configure communication between IP product and the Management application server,
complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Product Communication from the Software Configurations list in the Category pane.
The Product Communication pane displays ( Figure 70 ).
FIGURE 70 Options dialog box (Product Communication pane)
3. To connect to products using SSH, complete the following steps.
a. Select the SSH only option.
b. Enter the connection port number in the SSH Port field. Go to step 6 .
The default SSH port number is 22.
4. To connect to products using Telnet, select the Telnet only option. Go to step 6 .
5. To connect to products using SSH then Telnet, complete the following steps.