Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 897)

Brocade Network Advisor IP User Manual 845
53-1003153-01
Element Manager interface overview
23
6. Rediscover button — Click to manually refresh the Element Manager and display the latest
information from the switch.
7. Auto Rediscover check box — Select the check box to automatically refresh the Element
Manager in five-minute intervals. Clear the check box to stop auto-rediscovery.
8. Product List Search — Use to search for a port in the port list. For detailed instructions, refer to
“Search” on page 407.
9. Help — Click to display the online help.
Displaying port properties
You can select any of the following views from the view list on the Element Manager toolbar to view
the port properties:
• Port View: Select this view for a hierarchical view of the slots and trunks listing their respective
ports.
• Table View: Select this view for a sequential list of the ports in the slot #/port # format.
• VLAN View: Select this view for a hierarchical view of the VLANs listing their respective ports.
Table 81 describes the properties of the Port View and Table View.
TABLE 81 Port View and Table View port properties
Field/Component Description
Identifier The identifier of the port. Displays a chronological order of the ports in
chassis/slot/port format.
Name The name of the port.
MAC Address The MAC address of the port.
Status The operational status (Up or Down) of the port.
State The management state (Enabled or DIsabled) of the port.
NOTE: To enable or disable a port, right-click a slot (or slots), trunk (or trunks), or port
(or ports) and select Enable or Disable.
Type The type of the port.
Speed The speed of the port.
L2/Tag Mode Whether the port is tagged or untagged or dual.
Untagged VLAN ID The untagged VLAN identifier of the port.
Tagged VLAN ID The tagged VLAN identifier of the port.
NOTE: To wrap the VLAN IDs displayed in the column, right-click the Tagged VLAN ID
column and select Wrap. By default, the VLAN IDs are not wrapped in the
column.
Duplex Mode The duplex mode of the port.
MCT Client Name The MCT client name.
Role The role of the port. Possible values include the following roles:
•
MCT
•
ICL
Module The name of the module to which the port belongs.
NOTE: This property is displayed only in Table View.