Starting immediate backup, Reviewing backup events – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 193
Brocade Network Advisor IP User Manual
139
53-1003153-01
Server Data backup
5
3. Select an interval from the Backup Interval drop-down list to set how often backup occurs.
4. Click Apply or OK.
The minimum value is 6 hours and the maximum value is 24 hours.
Starting immediate backup
NOTE
You must have backup privileges to use the Backup Now function. For more information about
privileges, refer to
To start the backup process immediately, complete one of the following procedures:
Using the Backup Icon, right-click the Backup icon and select Backup Now.
The backup process begins immediately.
OR
1. Select Server > Options.
The Options dialog box displays.
2. Select Server Backup in the Category list.
3. Click Backup Now.
Click Yes on the confirmation message. The backup process begins immediately.
4. Click Apply or OK.
Reviewing backup events
The Master Log, which displays in the lower left area of the main window, lists the events that occur
on the Fabric.
If you do not see the Master Log, select View > Show Panels > All Panels.
The following backup events appear in the Master Log:
•
Backup started
•
Backup error
•
Backup Enabled
•
Backup Disabled
•
Backup Now
•
Backup destination change
•
Backup interval change
•
Backup start time change
•
Domain workgroup change
•
User name change
•
User password change
•
Number of files backed up on completion