Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1525)

Brocade Network Advisor IP User Manual 1473
53-1003153-01
Properties customization
E
Properties customization
NOTE
Properties customization requires read and write permissions to the Properties - Add / Delete
Columns privilege.
You can customize the product Properties dialog boxes by creating user-defined product and port
properties. You can also edit or delete user-defined properties, as needed.
You can create up to three user-defined property labels from the Properties dialog box for each of
the following object types: product and port properties. Product property labels created from the
Properties dialog box display in the Product List and the Properties dialog box. You can only view
port property labels on the Ports tab of the Properties dialog box. User-defined properties must be
unique across all Properties dialog boxes and the Product List.
You cannot edit the user-defined property field contents from the Product List; however, you can
edit the field in the Properties dialog box.
Property fields containing a green triangle ( ) in the lower right corner are editable. To edit a field
with a green triangle ( ), click in the field and make your changes.
Adding a property field
You can add up to three new user-defined properties to the Properties and Ports tabs of the device
Properties dialog box.
To add a user-defined property, complete the following steps.
1. Right-click any product icon and select Properties.
The Properties dialog box displays.
2. Select the tab to which you want to add a property, if necessary.
3. Click Add.
The Add Property dialog box displays.
4. Enter a label and description for the property.
The label must be unique and can be up to 30 characters.
The description can be up to 126 characters.
5. Select Port or Property from the Type list, if available.
6. Click OK.
The new property displays in the properties list as well as the Product List. To edit the
user-defined property field, click in the field and make your changes.
Editing a property field
NOTE
Properties customization requires read and write permissions to the Properties - Add / Delete
Columns privilege.
You can edit any property that you create on the Properties dialog box.