Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 269)

Brocade Network Advisor IP User Manual 215
53-1003153-01
User profiles
6
2. Click the Policy tab.
3. Select the Use User CLI Credential check box in the CLI Credential area.
A confirmation message displays. Click Yes on the message.
Make sure to configure the User CLI Credentials in the User Profile dialog box (refer to
“Configuring CLI credentials” on page 214). These credentials will be used for all CLI
deployments and will override the CLI credentials configured during discovery or in the CLI
template.
4. Click OK on the Users dialog box.