Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 388)

336 Brocade Network Advisor IP User Manual
53-1003153-01
Status widgets
8
• Bar chart — Displays each group as a separate bar on the graph. Displays the current state of
all products discovered for a group in various colors on each bar. Displays the color legend
below the x-axis. Tooltips showing the number of devices in that state are shown when you
pause on the bar.
• Color legend — Displays the color legend below the bar chart.
- Green — Reachable: IP product is online and accessible by IP (ICMP/TCP) and SNMP.
- Orange — Degraded Link: IP product is accessible by IP (ICMP/TCP); however, it is not
accessible by SNMP.
- Maroon — Not Reachable: IP product is not online and not accessible by IP (ICMP/TCP).
• Time Scope — The time scope.
Customizing the IP Inventory widget
You can customize the IP Inventory widget to display product inventory for a specific grouping. The
group type and number of products in the group displays to the left of the associated bar; for
example, v04.1.00a [3], where v04.1.00a is the firmware number and [3] is the number of
products running that firmware level.
• Change the grouping by selecting one of the following from the Group By list:
- Firmware — Displays the product inventory by firmware release.
- Model — Displays the product inventory by model.
- Product Type — Displays the product inventory by product type.
- Location — Displays the product inventory by physical location.
- Contact — Displays the product inventory by contact name.
• Zoom in on an area of the widget by dragging the mouse (upper left corner to lower right
corner) to select one or more bars.
NOTE
If the ratio between the longest and shortest bar reaches 5000:1, you should maximize the
widget prior to using zoom.
To return the widget to its original state, reverse the selection (drag from lower right corner to
upper left corner).
Accessing additional data from the IP Inventory widget
Double-click a section of the bar in the IP Inventory widget to navigate to the IP Products - Status
dialog box (where Status is the status of the section you selected). For more information, refer to
“Viewing additional IP product data” on page 338
NOTE
It takes a few moments to populate newly discovered products in the IP Products - Status dialog box
(where Status is the section of the widget you selected).