Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1080)

1028 Brocade Network Advisor IP User Manual
53-1003153-01
VCID pools
29
VCID pools
VCID pools contain VCID that can be used in a VLL or VPLS instance. You may create a combined
VCID pool containing VCIDs that are shared by VLL and VPLS, or you may create a segmented VCID
pool that provides separate VCID pools for VLL and VPLS configurations.
Viewing, creating, and deleting VCID pools
To view a VCID Pool and to create or delete VCID pools, do the following:
1. Select Configure > MPLS > VCID Pool.
The VCID Pool dialog box displays ( Figure 438 ).
FIGURE 438 VCID Pool dialog box
2. For VCID Pool Type, select Combined if you want to create a combined VCID pool containing
VCIDs that are shared by VLL and VPLS, or Segmented if you want to create a segmented VCID
pool that provides separate VCID pools for VLL and VPLS configurations.
If you select Combined, and single Pool Values list is displayed. If you select Segmented, a
VPLS Pool list and a VLL Pool list are displayed.
The Pool Values list displays starting and ending numbers in the pool, the percentage of VCIDs
available in the pool, and the next available VCID.
3. Click the Add button to add an empty entry to the table.
4. Click the Delete button to delete a selected entry.